Empty Disposable CBD Vape

1.Product Description

How long is the service life of the atomized electronic cigarette rod?
The service life of the electronic cigarette rod is at least 1 year. Within 1 year, if the product is not damaged by human factors, the cigarette rod can be used.
What is the service life of the cigarette cartridge? How long is the shelf life?
Each cigarette cartridge is equivalent to the amount of smoke in two packs of cigarettes. If you smoke a pack of ordinary cigarettes every day, a cigarette cartridge can be used for 2-3 days, and the shelf life of the cigarette cartridge is two years.
How long can an electronic cigarette be used?
The battery and atomizer of the electronic cigarette can be recycled, and the cigarette cartridge is a consumable. You can buy another cigarette cartridge after it is used up, or you can buy the smoke oil and add it yourself.
How long does it take to charge?
The battery of the electronic cigarette is a lithium battery. For the first three times of use, it is recommended that users charge for 4-8 hours after the power is used up (the cigarette rod light flashes automatically), and then charge for 2 hours each time.

Do I need to charge it when I first buy it? When should I charge it?
Answer: When the cigarette holder leaves the factory, it is inspected by specialized personnel, so the battery has a certain amount of power. It is recommended that users use up the power before charging, which can extend the battery life. When the light in front of the cigarette holder flashes automatically and quickly, it means that the battery is out of power and the user should charge it in time.

2.Product Specification

Indicator light function
Status LED display
Power on: 1 flash
Normal smoking: gradually on and off
Long-term smoking (10 seconds) protection: 2 flashes
Short circuit protection: always on for 2 seconds
Overcurrent protection: always on for 2 seconds
Undervoltage protection: 10 flashes
Release charging: 3 flashes
Charging indication: always on
Fully charged: off (completely shut down charging current)

The principle of electronic cigarettes for quitting smoking
The principle of electronic cigarettes for quitting smoking is very simple, that is, to use e-liquids containing nicotine (from high to low), and finally to e-liquids containing nicotine with a concentration of 0, to replace ordinary cigarettes to relieve addiction, so that people can gradually get rid of their physical dependence on nicotine and quit smoking. It is referred to as "nicotine replacement therapy".
How to choose a good electronic cigarette?
1. Smoke output.
The structural design of the entire electronic cigarette, the air inlet, and the airflow channel. Excellent electronic cigarette design can ensure a large amount of smoke output, and secondly, it can ensure the stability of the smoke output.
2. The advantages and disadvantages of the atomizer. The function of the atomizer is the atomization effect, which is the core component of the electronic cigarette. An excellent electronic cigarette must have an excellent atomizer guarantee. Shenzhen Atomizer It is the best in the country. 2. Battery life
The battery is related to the atomizer. Liquid atomization requires a lot of energy, so the length of battery life is a measure of whether an electronic cigarette is excellent.
3. The appearance of the electronic cigarette,
A good product has a refreshing appearance, strict design, and fine workmanship. It can give people a pleasant feeling and help to successfully quit smoking.
4. Taste,
The current flavor is mainly Marlboro flavor, which was originally targeted at foreign cigarettes. Taste is a defect of electronic cigarettes. The flavor of the liquid has not been adjusted for domestic use. The Chinese flavor that appeared later is actually a lie. It is not as good as Marlboro flavor, which is closer to real cigarettes. Menthol flavor, flue-cured tobacco, and fruit flavor are generally preferred by women.

Working principle of electronic cigarettes
Electronic cigarettes control the smoke output and working state through high-tech silicon chips and airflow sensors. Nicotine is atomized, and the solution containing nicotine and flavors is atomized into particles, absorbed through the lungs, and simulated smoke is exhaled at the same time. It does not contain tar and other harmful ingredients in cigarettes, and will not produce second-hand smoke or diffuse or linger in a confined space: traditional cigarettes are ignited and burned with tobacco leaves or tobacco, which harms the health of smokers and non-smokers at the same time.
Electronic cigarettes are currently widely used in some developed countries in Europe and the United States, mainly to replace traditional cigarettes. With the continuous improvement of my country's living standards. People are also constantly pursuing a higher quality of life, and gradually realize the serious harm of smoking. Quitting smoking has gradually become a common understanding. Therefore, substitutes such as electronic cigarettes are gradually welcomed by people. When inhaling, a high-speed airflow is formed in the sensor. The airflow sensor senses the inhalation of the human mouth, thereby triggering the airflow sensing switch, turning on the airflow sensing switch, and the product begins to enter the working state. The central processing unit controls the execution unit to work through calculation and measurement. The atomizer is controlled by the central control unit and achieves different degrees of atomization according to the degree of oral suction. The atomizer consists of a high-frequency oscillation circuit and a heating wire. In the atomizer, the high-purity electronic cigarette liquid is pressurized by an ultra-fine atomization pump and enters the atomization chamber. In the vibration field of the high-frequency ultrasonic wave, it is critically atomized into droplets of about 0.5-1.5um, and then dispersed into the form of aerosol with the inhaled airflow, thereby forming a vapor mist simulating smoke. The appearance is similar to smoke, but it is actually fog. The critical atomization condition is to reduce the surface tension of the liquid to the most easily atomized level by heating. While simulating smoke, it also simulates the temperature of ordinary smoke (50-60 degrees Celsius). At the same time, the green indicator light on the front end of the electronic cigarette lights up, simulating the fire of the cigarette butt, indicating that the electronic cigarette is in working condition. When you stop inhaling, the airflow in the sensor disappears, the airflow sensing switch is turned off, the circuit board IC processor stops working, the atomizer stops working, and the green indicator on the front end of the electronic cigarette is off.

It is different from the vertical stripes of the first model, this model we are diamond shaped window, But this one we only make one type capacity,it is 1ml.Stainless steel center rod, a variety of colors customized, a small number of samples we can also accept, is your best choice.

Thick oil/thin oil is also appropriate.

This one we use high-quality stainless steel center rod, large oil inlet hole, for thick oil and thin oil can meet you, 300 mah large-capacity battery with USB interface, can also be charged at any time, we have four best-selling colors, automatic air switch button, drop oil can be pumped, so that oil will not be wasted at all, very meet your needs, A very high practical value CBD vape.

 

4.Company Profile

Our factory is a professional CBD e-cigarette factory with more than 10 years of experience. We accept OEM/ODM orders.

 

Hot Tags: empty disposable cbd vape, China empty disposable cbd vape factory, Mini Tank CBD Vapor, portable disposable vaping device, mini e cig bar, E Cigarette 1ml Ceramic Coil Pod, cbd ceramic coil vaporizer, oem disposable e cigarette